Inline Guard Rail Post

ValueRail™ makes it easy and quick to order exactly the correct Posts and Railings you need for your specific guard rail application. Inline posts have the center of the "I" beam pre-drilled for straight runs of guard rail.  

No waste, no unnecessary kits with extras, just pure value.

• 6" Steel I-Beam Post
• 7" x 9" x 3/8" Steel base plate
• Rail Mounting Hardware - 1/2" x 1-1/2" Bolts, 1/2" Washers, and 1/2" Nuts
• Post Mounting Hardware - 3/8" x 4" Wedge Bolts
• Rubberized Protective Post Cap
• Painted Safety Yellow

When bolted together the bottom of the guard rail is approximately 5 inches from the floor. The double and triple guard rail systems have approximately 12 inches between each rail. All mounting hardware noted above to anchor posts and bolt rails to posts are included with the purchase of posts.

Configuration Diagram